Walkera Dragonfly V370D05 6CH Flybarless CCPM Metal RC Helicopter RTF 2.4GHz w/ WK-2603 TX, 3 Axis Gyro Stayblizing Sys.

Walkera Dragonfly V370D05 6CH Flybarless CCPM Metal RC Helicopter RTF 2.4GHz w/ WK-2603 TX, 3 Axis Gyro Stayblizing Sys. Highlight features of the V370D05

• The metal rotor head cut by CNC, designed without flybar, features low power loss and great efficiency improvement.
• Controlled by 3-axis gyro,with flybarless balance electronic system, amend flight status automatically, makes more stable flight and flexible 3D performance.
• High performance brush motor powered by 7.4V1200mAh Lipo battery can fly 9-10minutes after fully charged.
• 2.4G Frequency-hopping spread spectrum technology automatically assigns ID code with strong anti-jamming and high accuracy

What is flybarless system?

Paddles are doubtless an important component in RC helicopters for a long time, it the aircraft stable. Recently, 3-Axis Gyroscope has been introduced to RC helicopters and this is how Flybarless System has born. The NEW Flybarless System takes away the paddles and flybar, leaving the stabilizing job completely to the high tech 3D Gyroscope. Proven by Helicopter World Champion, result is 100% positive. Without the weight of the flybar and paddles, the helicopter now moves in higher speed, and saves almost 30% energy. Also, less parts means less repair and maintenance!

What exactly a 3-Axis Gyro do?

3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts too much, you will not even notice the system exists. The following diagram will simply tell you more on how it works.




Flybarless structure with CNC-machined rotor head and metal swashplate looks fine and beautiful. It is loved by modelers.


The 370 brushed motor offers powerful drive. Cooling holes opened in its surface ensure very nice heat sinking


Tail motor with cooling holes features nice heat sinking characteristic and puts an effective and accurate effect on head locking


Separate ESC ensures outstanding heat sinking performance and power output.


The receiver RX2614V integrates together the receiving circuit and flybarless system to build a brand new flybarless system driven by tail motor. According to the requirement, it is possible to adjust the gyro gain. RX2614 ,


With the Walkera NEW Transmitter--WK-2603, you can even enjoy much more on the flight!

V370D05

• Main Rotor Diameter: 555 mm
• Tail Rotor Diameter: 146 mm
• Overall Length: 545mm
• All-up Weight: 375g (Battery included)
• Battery: 7.4V 1200mAh Li-Po
• Mian Motor: 370SH
• Tail Motor: 1627F
• GYRO: 3-axis
• Receiver: RX-2614V
• Transmitter：WK-2603
• Servo: wk-7.6-5

• 1 x 6-Ch 2.4G WK2603 Digital Transmitter
• 1 x Pre-assembled Helicopter
• 1 x Battery Charger( Suitable for your country )
• 1 x Li-Po Battery
• 1 x Adjustment Tool
• 1 x Instruction Manual