Walkera Dragonfly V200D03 6CH Flybarless CCPM Metal RC Helicopter RTF 2.4GHz w/ Devo 8 TX, 3 Axis Gyro Stayblizing Sys.

Walkera Dragonfly V200D03 6CH Flybarless RC Helicopter RTF 2.4GHz w/ Devo 8S TX, 3 Axis Gyro Stabilizing Sys.

Highlight features of the V200D03

• 2.8 inch colored touch screen, Icon menu display, fashionable and easy to use.
• Humanization design. Rubber grips design on the side and back of the Radio provide a sense of comfort.
• Quad-bearing design. Improved quad-bearing design of the Radio sticks makes the control silky and smoothly.
• Multi language selectable. At present ,Chinese and English are available , later you can upgrade online for Germany ,French, Italy,Spanish,and so on.
• 2 Model Type: Helicopter and Airplane. Improved programming with more mixes and better interface Program MIX ,MIX to Throttle.
• 7-point throttle curve makes the control exquisitely.
• Twelve-model memory.
• Online update function : Enjoying update the latest program and copy model data freely and easily.

What is flybarless system?

Paddles are doubtless an important component in RC helicopters for a long time, it the aircraft stable. Recently, 3-Axis Gyroscope has been introduced to RC helicopters and this is how Flybarless System has born. The NEW Flybarless System takes away the paddles and flybar, leaving the stabilizing job completely to the high tech 3D Gyroscope. Proven by Helicopter World Champion, result is 100% positive. Without the weight of the flybar and paddles, the helicopter now moves in higher speed, and saves almost 30% energy. Also, less parts means less repair and maintenance!




What exactly a 3-Axis Gyro do?

3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts too much, you will not even notice the system exists. The following diagram will simply tell you more on how it works.




Don't miss out this, the new transmitter! Walkera has produced the new transmitter series-- the Walkera Devention. In short form "DEVO", it is a high end brand under WALKERA Co., DEVO 8 is a brand new edition,which adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) technology, features automatic ID binding and ID assignment, also personalized fixed ID setup. You can enjoy a fashionable,touch computer radio with nice and neat looking. The wireless copy function keeps you away from the trouble of wire data transmitting and receiving.Most important, the the USB Online update technology ensures you have powerful programs for your radio and much more information far from the manufacturer quite conveniently at home.

Check the features of this NEW Transmitter:

• 2.8 inch colored touch screen, Icon menu display，fashionable and easy to use.
• Humanization design.Rubber grips design on the side and back of the Radio provide a sense of comfort.
• Quad-bearing design.Improved quad-bearing design of the Radio sticks makes the control silky and smoothly.
• Multi language selectable，At present ,Chinese and English are available , later you can upgrade online for Germany ,French, Italy,Spanish,and so on.
• 2 Model Type: Helicopter and Airplane. Improved programming with more mixes and better interface Program MIX ，MIX to Throttle.
• 7-point throttle curve makes the control exquisitely.
• twelve-model memory.
• Online update function:Enjoying update the latest program and copy model data freely and easily.

V200D03

• Main Rotor Dia. : 458mm
• Tail Rotor Dia. : 115mm
• Overall Length: 425mm
• Drive Motor: WK-WS-21-002
• ESC: WK-WST-20A
• Transmitter:DEVO 8
• Battery: 11.1V 800mAh Li-Po
• Weight: 342g (Battery included)

Transmitter

• Encoder: ARM micro computer system
• Frequency: 2.4Ghz（DSSS）
• Output power:-5dBm~20dBm
• Battery: 1.2V x 4 NiCard or1.5V x 4 AA dry batteries
• Current Drain: ≤220mA

• 8-Ch DEVO 8 2.4G Remote controller x 1
• Pre-assembled Helicopter x 1
• Battery Charger x 1
• 11.1V 800mAh Li-Po Battery x 1
• Adjustment Tool x 1
• Instruction Manual (In a CD-ROM) x 1
• USB Cable (Data Transfer) x 1
• DSC Cable x 1
• Neck Strap x 1