Walkera Dragonfly LM130D01 4CH Flybarless FP Coaxial Metal RC Helicopter RTF 2.4GHz w/ WK-2403 TX, 3 Axis Gyro Stayblizing Sys.

Walkera Dragonfly LM130D01 4CH Flybarless Coaxial Metal RC Helicopter RTF 2.4GHz w/ WK-2403 TX, 3 Axis Gyro Stabilizing Sys.



Highlight features of the LM130D01

• Coaxial structure and palm-sized dimension are used to make LM130d01 as an optimal model for indoor entrainment.
• Compact flybarless design,low power loss and great efficiency improvement
• Controlled by three-axis gyro, with flybarless balance electronic system, amend flights status automatically, makes more stable flight.
• New 2.4G technology, with the functions of automatic identification and precise code pairing, can allow over 20 aircrafts to fly in the same field and same time.
• High performance 2 x 130SH motor, powered by 7.4V 640mAh Lipo, offers over 10 minutes flight time, depending on the flight modes.

Coaxial structure, but equipped with 3D shape, 3D canopy, 3D landing gear, metal main frame, and metal tail boom. Receiver RX-2452V, which integrates receiving circuit, speed controller, and three-axis gyros together, is composed of Walkera Coaxial Flybarless Control System Two 7.6g digital servos feature prompt response and fine control.




What is flybarless system?

Paddles are doubtless an important component in RC helicopters for a long time, it the aircraft stable. Recently, 3-Axis Gyroscope has been introduced to RC helicopters and this is how Flybarless System has born. The NEW Flybarless System takes away the paddles and flybar, leaving the stabilizing job completely to the high tech 3D Gyroscope. Proven by Helicopter World Champion, result is 100% positive. Without the weight of the flybar and paddles, the helicopter now moves in higher speed, and saves almost 30% energy. Also, less parts means less repair and maintenance!

What exactly a 3-Axis Gyro do?

3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts too much, you will not even notice the system exists. The following diagram will simply tell you more on how it works.




With the Walkera Transmitter--WK-2403, you can even enjoy much more on the flight!

Highlight Features of Walkera WK-2403:

• The WK-2403 adopts frequency-hopping spread spectrum 2.4G technology and features automatic code pairing and ID assignment.
• Graphic display menu is simple to understand and to set.
• The appearance design accords with ergonomics and features easy holding. The LCD screen with back light and graphic interface looks more personalized.
• Both the length and tension of the stick can be adjustable. It is convenient to freely switch among the 4 stick modes.
• New! Throttle Limit. This limits the throttle to 30-80%, which limits the height.
• New! Dual Rate Switch. This limits the servo travel to 50% for more stable flight

• Upper Main Blade Dia.: 412 mm
• Lower Main Blade Dia.: 412 mm
• Overall Length: 350 mm
• Drive Motor: 2 x 130SH
• Battery: 7.4V 640mAh Li-Po
• Gyro: 3-Axis
• Transmitter: WK-2403
• Receiver: RX-2452V
• All-up Weight: 228g (Battery included)
• Servo: wk-7.6-7

• Walkera LM130D01 2.4G Helicopter Body x 1
• Walkera Transmitter WK-2403 4ch 2.4G x 1
• 7.4V 640mAh Battery Li-polymer Battery x 1
• Charger x 1
• Manual x 1

Per Unit

• Gross Weight : 2,000g
• Dimension: 27 x 20 x 52cm