Walkera Dragonfly CB180Z 4CH FP CNC Metal RC Helicopter RTF 2.4Ghz w/ LCD Tx, 3 Axis Gyro Stablizing Sys.

Walkera Latest Release--CB180Z.



CB180 series has a great success since it hit the market, the new Bell Rotor Head system allows the helicopter flies like no one else, the 45 degrees flybar makes the CB180 flies like a Co-Axial Helicopter, which have done a great favor for beginners. Now Walkera decided to boost up the performance, by adding all the good electronics in it, like a 3800kv Brushless Motor, Shaft Driven Tail Rotor, High Speed Rudder Servo and most of all, the 3-Axis Gyro with Auto Stabilizing Technology, this makes the CB180Z even more easier to fly!

What is Bell Rotor System?
The greatest feature on the CB180Z is the 45 degrees Stabilizer Bar, we call this design the "Bell Rotor System". It gives the CB180Z totally new flying experience. Factory used weight blocks instead of paddles at the end of the stabilizer bar, this makes the CB180Z fly "Much More" stable than ordinary rotor head design, as a trade off, it flies slower, but more stable. We tested the CB180Z and we found that this new design makes the helicopter as stable as a Co-Axial model, we think Walkera have done it in developing a Single Rotor helicopter for beginners!

Since the CB180Z is the Ultimate mode, it has the 2.4GHz radio system and metal upgrades as well, that makes it even more Durable and more Precise.

Here are some highlight features of the Walkera HM CB180Z

• Precise CNC-machined rotor head provides more operation accuracy
• Compact swashplate structure is adopted and with light and fine fuselage, it is super stable to fly
• Gear and Shaft driven structure makes the setting easy and more efficient to fly
• New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time
• High performance Brushless motor powered by 7.4V 1000mAh Lipo offers 9 to 11 minute flight time, depending on your flight mode.

Highlight features of the Walkera WK-2402:

• The WK-2402 adopts frequency-hopping spread spectrum 2.4G technology and features automatic code pairing and ID assignment.
• Graphic display menu is simple to understand and to set.
• The appearance design accords with ergonomics and features easy holding. The LCD screen with backlight and graphic interface looks more personalized.
• Both the length and tension of the stick can be adjustable. It is convenient to freely switch among the 4 stick modes.

Let's see what is the difference between CB180D and CB180Z.

Walkera CB180Z Specification

• Brushless Motor: WK-WST-21-003
• Brushless Speed Controller: WK-WST-20A-1
• All-up Weight: 278g (Battery included)
• Tail Rotor Diameter: 121 mm
• Main Rotor Diameter: 440 mm
• Overall Length: 432 mm
• Gyro: Built-in New with 3-Axis Stability Control
• Battery: 7.4V 1000mAh Li-Po
• Receiver: RX-2437S
• Transmitter: WK-2402
• Rudder Servo: wk-7601 weight 6.0g / speed 0.08 sec/60° (4.8V) torque 1.0kgf.cm / dimension 21.5*11.8*21.7mm Servo: wk-7.6g-6 weight 8.5g / speed 0.09sec/60° (4.8V) torque 0.9kgf.cm /dimension 22.5*11.5*24mm

WK 2402 Specification

• Encoder: 4 channel
• Frequency: 2.4GHz
• Outpower: ≤10mW
• Current Drain: ≤120mW
• Power Source: 1.2V x 8 NiCd (9.6V600mAh) or 1.5V x 8 AA Dry Batteries
• For: RX-2403D, RX-2406C, RX-2420, RX-2423

• 1 x Walkera CB180Z 2.4G Helicopter
• 1 x WK-2402 2.4GHz Transmitter
• 1 x Li-polymer 7.4V 1000mAh Battery
• 1 x Battery Charger
• 1 x Quick Start Guide and Manual in English
• 1 x Gift box

• Gross Weight: 1.92kg
• Dimension: 50 x 19 x 28cm