Skyartec WASP V4 Belt 250 CNC Metal CCPM 7CH RC Helicopter RTF w/ 7CH 2.4GHz TX & RX HWH05-2

This brand-new (FC) metal version BELT 250 helicopter which is equipped with 7-channel transmitter,has been researched sucessfully.it's concepted to be a high performance,ease of control,stable,durable,and lightweigh helicopter.It adopts PPM control component metal swashplate,metal tail rotor gear box set,belt driven system and professional gyro,which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and flight stability.furthermore,our new SKYARTEC's BELT 250 is equipped with high quality CNC alloy rotor head/frame and matched with high performance 4500KV Brushless motor,Brushless ESC,and Li-po Battery.

This BELT 250 should be the perfect choice for both the beginners and experts due to its compact size,stability,and agility.Also,it has a great advantage that is: it is suitable for indoor,outdoor,backyard and stadium flying.In addition. It can be flown easily near the ground,and is highly damage-resistant.so dont hesitate to choose this item.

Here are some highlight features of the WASP V4 BELT 250 Metal Version

• Adopts PPM control component , metal swashplate,tail rotor and Belt driven system, professional gyro, which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and fllight stability.
• 1 x 18A Brushless Speed Controller.
• 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set.
• High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight much stable and better performace.
• High quality CNC alloy rotor head dopts Light weight,Ultra tough Carbon Fiber side board.
• Using alloy tail boom.
• Can fly in skyway, backward, and 3D aerobatic.
• PPM mixing control system and collective pitch structure.
• 120 degree PPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced mproved blades give superior lift. Their pop off design gives extra protection in case of heavy landing.
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage.
• Hard, Light weight ABS Blades.
• Brand new design for the structure.
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying.
• Tail rotor driven by belt provide stable flight and low noise.
• NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter No need to worry about burning tail motors.
• Outer placed Head Lock Gyro.
• 11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight.
• With length-adjustable servo push-rod, precision sub trim can be easily set.
• Separate main shaft and main gear reduce repair time and noise.
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter.
• Easy to fly and more stable lifting.
• PPM receiving and transmitting system increases the operation stability.
• PPM mode with adjustable pitch system and 3D conversion.
• Provide excellent performance outdoor and indoor.
• Tail blade adopt flameout landing system.
• Newly Designed Rotor Head gives better control.
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install.
• Extreme smooth control and stable flight.
• Precise controlling and hovering.
• Digital Proportional Motor Speed Control.
• Suitable for Indoor/Outdoor/Backyard/Stadium.
• Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality ABS Blades , which is extremely light and not easily break.
• Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• Best choice for Beginner - Advanced hobbyist.
• All spare parts and accessories are available.
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)

Metal Rotor Head

Metal Tail Rotor

• Main Rotor Diameter: 470mm
• Length: 460mm
• Flying Weight: 330g
• Driven System: Skyartec 4500KV Brushless Motor
• Gyro: Skyartec Head Lock
• Servo: 3X Skyartec 8g + 1X Skyartec 5g
• ESC: Skyartec 18A
• Battery: Skyartec 11.1V 900mAh Lithium Li-Po

	BELT 250 Plastic Version	Belt 250 Metal Version
Main Rotor Diameter	470mm	470mm
Length	460mm	460mm
Flying Weight	330g	330g
Driven System	4500KV Brushless Motor	4500KV Brushless Motor
Gyro	Skyartec Head Lock	Skyartec Head Lock
Servo	3 x 8g , 1 x 5g	3 x 8g , 1 x 5g
ESC	18A	18A
Battery	11.1V 900mAh Lithium Li-Po	11.1V 900mAh Lithium Li-Po
Rotor Head	Plastic	Metal
Tail Rotor	Plastic	Metal

• 1 x Wasp V4 Belt 250 CNC Helicopter
• 1 x 18A Brushless Speed Controller
• 1 x SKY 600 Head Locked Gyro
• 4 x Servos
• 1 x 4500kv Brushless Motor
• 1 x 7ch TX/RX
• 1 x 11.1V 900mah LI-PO Battery
• 1 x Balance charger
• 1 x Color PVC Canopy

• Box Size: 53 x 25 x 17cm
• Gross Weight: 2750g