iMax B6AC+ Dual Power Intelligent Digital Balance Charger/Discharger

NEW! Original imax B6 AC intelligent Digital Balance Charger
Input: 110-240V 50Hz (AC) 12-18V (DC)

NiCd/NiMh/Lithium/PB Batteries

The X-Charger B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A. The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle. Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement. The integrated fan avoid overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car battery. Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalize the voltage to be equal.

Optimized operating software charger with integrated safety timer.

iMax B6AC+ has the following highlight features:

• Charge/discharge up to 5 cycles
• Fast charging program for Lithium batteries
• PC based analysis using USB communication graph of voltage, current, capacity
• Data storage and load program for your convenience.
• 16 chr + 2 lines LCD-screen
• Includes input power cable 11-18V DC and 110 - 240V (AC)
• Individual connection cable for most RC-usage

• Operating voltage range:DC11.0~18.0 Volt
• AC to DC adapter (15V/5A)
• AC input:(110V~240V AC)
• Circuit power:Max. charge power 50W
• Max. discharge power5W
• Charge current range:0.1~5.0A
• Discharge current range:0.1~1.0A
• Current drain for balancing Li-po:300mAh
• NiCd/NiMH battery cell count:1~15cell
• li-ion/Polymer cell count:1~6 series
• Pb battery voltage:2V~20V

• iMax B6AC+ Charger/Discharger x 1
• Connection Cable Set x 1
• English Manual x 1

• Gross Weight: 1143g
• Dimension: 22 x 21 x 6cm