Futaba 12Z 2.4GHz Transmitter & R6014HS Receiver Computer System

Please notice that the old price USD939.99 was SOLD OUT!
All new stock from HK Futaba has raised a lots for the price.
Please DO NOT ask for the old price, as we confirmed that it is NO MORE available in the coming new stock.

This is the FASST 2.4GHz Futaba 12Z Computer Radio on Mode 2 with the R6014HS High Speed Synthesized 14-Channel Receiver.
The Futaba 12Z shares many features with the 14MZ such as Dual Internal Processors, Real-Time Response with 2048PCM, Fully Synthesized Receiver, Servo Grouping, Variable Dual Rates and Quad-Bearing Gimbals.

What makes Futaba's 2.4GHz system different?

• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
• Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
• Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model
• Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict
• No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs
• When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter

General Features:

• Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly programming
• PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM
• Supports 13 different wing types, 3 tail types and 3 motor types
• Supports eight flight conditions (seven plus the default)
• Stores memory for up to twenty-five models
• 245 model memory available with optional 32MB Compact Flash Card
• Six factory-set Variable Dual Rate (VDR) curves can be assigned to any function in any flight condition configuration
• Variable Dual Rates (VDR) and Expo can be combined so they are automatically activated when a function is activated, no program mixing required
• Dual Internal Processors allow one processor to be devoted to flying functions while the other processor focuses on non-flight functions such as input and communications
• 7.4V 2200mAh Lithium Ion transmitter battery (FUTM1475) for long operating times

R6014HS High Speed Receiver Features:

• R6014HS is a new version 2.4Ghz Receiver from Futaba. It could be operated in Normal Mode or High Speed mode. The Normal Mode accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The High Speed Mode accept the digital servos for outputs from 1ch to 6 ch, including BLS Series, and most peripheral equipments such as the gyro or brushless ESCs. The frame rate of the outputs is 7ms.
• Retains G3 2048 resolution and Futaba Real Time Response from the 35Mhz/40Mhz/72MHz version
• Simple one-touch binding - no plugs to mess with or lose
• A full range system for all aircraft from giant scale to Park Flyer applications-no need to buy separate receiver for specific aircraft
• Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to select the best reception between the two receiver antennas with no signal loss
• Rubber grommets installed where antennas exit to eliminate stress and fraying of the two antenna wires

Servo Grouping:

• Multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing.
• Quad-Bearing Gimbals for smoothest motion and response, stick tension and detent are adjustable
• Seven color LED indicator

FASST 2.4GHz Futaba 12Z Computer Radio Specification:

• Operating System: 2-stick, 12 channels
• PCM-G3 Synthesizer System Modulation: PCM-G3, PCM 1024, or FM/PPM Switchable
• Power Supply: 7.4V FLT2F2200 Li-Ion Battery
• Current Drain: 500mA average

R6014HS High Speed Receiver Specification:

• 2.4Ghz SS
• Dual antenna diversity
• Power requirement: 4.8V or 6.0 V battery or regulated output from ESC
• Dimensions: 52.3 x 37.5 x 16.0mm
• Weight: 20.8g

TM-14 Module Specification:

• Communication Method: One-way operation system
• Transmission Antenna: Mono-pole

• 1 x 12Z Synthesized Transmitter
• 1 x FASST TM-14 Module
• 1 x R6014HS Receiver
• 1 x FLT2F2200 7.4V 2200mAh Lithium Ion Transmitter Battery
• 1 x LBC-1D5 Lithium Ion Transmitter Battery Charger
• 1 x NR4F NiCd 1500mAh Receiver Battery
• 1 x FBC-32B Wall Charger for Receiver Battery
• 1 x DSC Cable
• 1 x Instruction Manual