Futaba 10CG 2.4G 10ch Transmitter & R6014HS 14ch Receiver Combo w/ 2 Batteries

2009 NEW 2.4Ghz Futaba T10CAG transmitter! Built-in 10 channels 2.4Ghz module, light in weight, no need to plug in the TM module anymore! NEW R6014HS supports high speed communication with Futaba's digital servos to provide real-time action for your plane.

You may control your airplanes, helis and gliders all with this single 2.4Ghz radio system!

The 10CG is perfect for the price-conscious pilot — an integrated, 2.4GHz treasure trove of features formerly found only on the most advanced Futaba systems.

But it’s also a system that boasts advantages few others can claim: 7-point throttle and pitch curves; 4 heli flight modes; a round dozen factory-defined glider mixes; graphics for programming swash plate types; swash ring; and logic switches that allow you to activate a timer or other function just by changing the positions of specific sticks or switches.

Converting a signal from analog to digital form requires processing time — what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there’s no lag, either — just virtually instantaneous, real-time response.

A point to highlight: The NEW R6014 HS Receiver
R6014HS is a new version 2.4Ghz Receiver from Futaba. It could be operated in Normal Mode or High Speed mode. The Normal Mode accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The High Speed Mode accept the digital servos for outputs from 1ch to 6 ch, including BLS Series, and most peripheral equipments such as the gyro or brushless ESCs. The frame rate of the outputs is 7ms. The R6014HS is comptaible with the Fasst Transmitters with TM8 ( on 8Ch mode), TM10 (on 10Ch Mode), TM14 (on multi-ch mode)

Please note that this model does not include servo.

System Overview

• Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off
• Dial'n Key™ programming w/joystick navigation
• 15-Model memory (expandable w/optional CamPACs
• 10-character user name
• 10-character model name
• 2048 resolution in FASST 10-channel mode
• Basic & Advanced menus
• Enhanced airplane, heli & glider software
• Smart Switch Technology™ (SST) — Logic Switches allow you to activate a function when specified switch and/or stick positions occur
• Up/down on/off timer (activate by stick or switch)
• Tracks service hours for radio and models
• Mode 1-4 selectable (Modes 3 & 4 programmable)
• Assignable functions/switches
• Auxiliary channel screen — for 1-step function/switch assignment & eliminating unused auxiliary functions
• 2 proportional slider switches
• Digital trims on all 4 main channels
• Trim memory & sub-trims (all channels)
• Adjustable trim steps (1-40)
• Fail-safe, servo reversing & EPA
• "Full Functionality” trainer system (cord required)
• Flap switch (3-position)
• Retract switch
• Rotary Dial (3)
• Adjustable Throttle Cut/Idle Down
• Sticks w/length & tension adjustments
• Servo cycle w/bar graph displays
• Constant trim, voltage, name and timer display
• CE Certificated

Enhanced Feature

• Slider Switches
• Rotary Dials
• More Programmable Mixes
• More Factory-Defined Mixes
• R6014FS Receiver
• Built-in 2.4GHz Transmitter Module (non-removable)

Advanced Airplane Menu

• 8 Programmable Mixes (4 linear/ (4) w/5-point curves)
• 9 Factory-Defined Mixes: Elevator-Flap; Ailvator (for dual elevator servos); Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake w/elevator delay
• Dual/Triple rates (4 ch.)
• Exponential (4 ch.)
• Idle down
• Throttle cut
• Throttle delay
• Throttle Hold & Idle-up w/delay
• 2 independent gyro settings
• 7-point throttle curve
• Flap trim

Advanced Heli Menu
The 10C accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 flight modes — and automatically changes all three when the flight mode changes.

• 6 Programmable Mixes (4 linear/ (2) 5-point curves)
• 8 Factory-Defined Mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor; Offset; Revo (5-pt.); Delay; and Throttle Mix (ail/ele/rdr)
• Gyro menu
  
• 8 swash plate types w/graphics
• Swash Plate AFR
• 7-point throttle curves and (5) (including throttle hold) 7-point pitch curves
• Adjustable High/Low pitch setting
• 3 Adjustable Idle-up conditions

Advanced Glider Menu

• 8 Programmable Mixes (4 linear/ 5-point curves)
• 12 Factory-Defined Mixes: Butterfly-Elevator; Elevator-Flap; Chamber Mix (w/ail/ele/rdr adj.); Aileron-Flap; Aileron-Rudder; Flaperon; V-Tail; Flap Trim; Butterfly w/spoiler adj; and 4-point Offset (w/camber adj. for basic/launch/thermal/speed)
• Adjustable spoiler
• Adjustable Throttle Cut
• Single/Dual Aileron and Flap Servo Selections
• Start, Speed, Distance & Landing conditions, Adjustable Airbrake Activatio
• Adjustable Motor Cut

	Futaba 10CG Transmitter	Futaba 10C Transmitter
Receiver	R6014HS	R6014FS
Module	Fixed 2.4Ghz module	2.4 Ghz module, can be replaced with TM-10, 35 or 72MHz modules

• T10CHG or T10CAG Transmitter
• R6014HS 14ch 2.4GHz Receiver (with High Speed Feature!)
• Wall Charger FBC-18C(4) or compatible charger (We only provide 230v, 2 round pins plug)
• 700mAh Transmitter Battery NT8S700B
• 1000mAh Receiver NiCD Rechargable Battery NR-4RB
• On/Off Switch Harness, FUTM4385