Bantam Multi Charger/ Discharger 301DX-II

Operating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

Accept various types of Lithium battery
301DX-II can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing at both outputs.

PC based analysis using USB communication
For technical expert, 301DX-II offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack. This program can run on both outputs with single USB link to PC. You can download the software at here.

Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat.

• Operating voltage: DC 11~18 volts
• Charge/discharge power: max. 50 / 5W
• NiCd/MH: 1 to 15 cells
• LiIo/LiPo/LiFe: 1 to 6 S
• Pb: 2 to 20 V
• Charge current: 0.1 to 5.0A
• Discharg current: 0.1 to 1.0A
• No. of cycle: 1 to 5 times
• Weight: 320 g
• Dimension: 113 x 80 x 28 mm

• Multi Charger/ Discharger x 1