Bantam High-Power 2 ch. Balance Charger/ Discharger BC8DP

Operating software
The operating program in this charger is executed with mutual links and communications with every component to prevent any possible error, so it introduces the maximum safety. Especially, the charging algorithm is so multifarious that you can select the best program to suit your requirement. And BC8DP has a large LCD for showing various information including charge/discharge graphs during the process.

Firmware upgrade
User can upgrade the firmware of charger from the file in PC via USB. When the firmware needs to upgrade, user can download the upgrade file from the company web page and easily replace the firmware with newer version.

Dual input power
BC8DP employs the circuit that can be operated at AC(Aternating Current) or DC(Direct Current) input power. For AC input, the charger contains a AC-DC switching power supplier inside, which has 10A of power capacity and maximum output power of 120watts for charging. As a result, it can charge up to 22 cells of NiCd/NiMH and 8 series of Lithium batteries. When you use DC input power, the circuit power will be increased to 180watts. But there might be the limit of feeding current to a higher voltage of battery.

Monitor the individual voltages on discharge
BC8DP will monitor the individual voltages of the Lithium battery pack during discharge process as well as "FAST"and "STORAGE" mode. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

• Operating input voltage: DC 11~18 V, AC 100~240V 50/60Hz
• Idling current: approx. 100mA
• Charge/discharge power: max. 180/25W at DC input, max. 100/25W at AC input
• NiCd/MH: 1~22 cells
• LiIo/LiPo/LiFe: 1~8 series
• Pb: 2~ 28V
• Charge current: 0.1 to 10.0A
• Discharge current: 0.1 to 5.0A
• No. of cycles: up to 10 times, N/A for Lixx
• Battery data memories: up to 5 data per program
• Battery capacity range: 100 ~ 65000mAh
• Delta-peak sensitivity: Disable, Delicate, 5 ~ 20mV adjustable
• Trickle charge current: off, 50 ~ 300mA adjustable
• Current drain in balancer: 200mA/cell
• Weight: 1400g
• Dimension: 170x170x75 mm

• Balance Charger x 1