Bantam Deluxe AC/DC Balance Charger/ Discharger BC6DC

Operating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

Individual voltage balancer for Lithium batteries inside
BC6DC has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

Accept various types of Lithium battery
BC6DC can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

Data store/load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing at both outputs.

PC based analysis using USB communication
For technical expert, BC6DC offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack. This program can run on both outputs with single USB link to PC. You can download the software at here.

Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat.

• Operating voltage: DC 11~18 volts
• Idling current: approx. 100mA
• Charge/discharge power: max. 80 / 8W
• NiCd/MH: 1 to 15 cells
• LiIo/LiPo/LiFe: 1 to 6 S
• Pb: 2 to 20 V
• Charge current: 0.1 to 5.0A
• Discharg current: 0.1 to 1.0A
• No. of cycle: 1 to 5 times
• Battery data memory: up to 5 data
• Weight: 340 g
• Dimension: 130 x 90 x 30 mm

• Balance Charger x 1